Newly Isolated Penicillium sp. for Cellulolytic Enzyme Production in Soybean Hull Residue

Abstract (1) Background: The aim of this study was to evaluate the production and partial characterization of xylanase and avicelase by a newly isolated Penicillium sp. in solid-state fermentation, using soybean hulls as substrate. (2) Methods: Temperature, time, number of spores, and substrate moisture on xylanase and avicelase bioproduction were evaluated, maximizing activity with 30°C, 1x106 spores/g substrate, 14 and 7 days of fermentation with 70 and 76% substrate moisture contents, for xylanase and avicelase, respectively. (3) Results: Different solvents, temperatures, and agitation in the enzymatic extraction were evaluated, obtaining higher activities, 430.77 and 26.77 U/g for xylanase and avicelase using 30 min extraction and 0.05 M citrate buffer solution (pH 4.5 ), respectively at 60°C and 175 rpm and 50°C and 125 rpm. The optimum pH and temperature for enzymatic activity determination were 5.3 and 50°C. Enzyme extract stability was evaluated, obtaining higher stability with pH between 4.5 and 5.5, higher temperature of up to 40°C. The kinetic thermal denaturation (Kd), half-life time, D-value, and Z-value were similar for both enzymes. The xylanase Ed value (89.1 kJ/mol) was slightly lower than the avicelase one (96.7 kJ/mol), indicating higher thermostability for avicelase. (4) Conclusion: In this way, the production of cellulases using alternative substrates is a way to reduce production costs, since they represent about 10% of the world demand of enzymes, with application in animal feed processing, food production and breweries, textile processing, detergent and laundry production, pulp manufacturing and the production of biofuels.

Improvement of the alkali stability of Penicillium cyclopium lipase by error-prone PCR

BACKGROUND: Lipases are extensively exploited in lots of industrial fields; cold-adapted lipases with alkali-resistance are especially desired in detergent industry. Penicillium cyclopium lipase I (PCL) might be suitable for applications of detergent industry due to its high catalytic efficiency at low temperature and relatively good alkali stability. In this study, to better meet the requirements, the alkali stability of PCL was further improved via directed evolution with error-prone PCR. RESULTS: The mutant PCL (N157F) with an improved alkali stability was selected based on a high-throughput activity assay. After incubating at pH 11.0 for 120 min, N157F retained 70% of its initial activity, which was 23% higher than that of wild type PCL. Combined with the three-dimensional structure analysis, N157F exhibited an improved alkali stability under the high pH condition due to the interactions of hydrophilicity and ß-strand propensity. Conclusions: This work provided the theoretical foundation and preliminary data for improving alkali stability of PCL to meet the industrial requirements, which is also beneficial to improving alkali-tolerance ability of other industrial enzymes via molecular modification.

Production of thermostable ß-glucosidase and CMCase by Penicillium sp: LMI01 isolated from the Amazon region

Background: Cellulolytic enzymes of microbial origin have great industrial importance because of their wide application in various industrial sectors. Fungi are considered the most efficient producers of these enzymes. Bioprospecting survey to identify fungal sources of biomass-hydrolyzing enzymes from a high-diversity environment is an important approach to discover interesting strains for bioprocess uses. In this study, we evaluated the production of endoglucanase (CMCase) and ß-glucosidase, enzymes from the lignocellulolytic complex, produced by a native fungus. Penicillium sp. LMI01 was isolated from decaying plant material in the Amazon region, and its performance was compared with that of the standard isolate Trichoderma reesei QM9414 under submerged fermentation conditions. Results: The effectiveness of LMI01 was similar to that of QM9414 in volumetric enzyme activity (U/mL); however, the specific enzyme activity (U/mg) of the former was higher, corresponding to 24.170 U/mg of CMCase and 1.345 U/mg of ß-glucosidase. The enzymes produced by LMI01 had the following physicochemical properties: CMCase activity was optimal at pH 4.2 and the ß-glucosidase activity was optimal at pH 6.0. Both CMCase and ß-glucosidase had an optimum temperature at 60°C and were thermostable between 50 and 60°C. The electrophoretic profile of the proteins secreted by LMI01 indicated that this isolate produced at least two enzymes with CMCase activity, with approximate molecular masses of 50 and 35 kDa, and ß-glucosidases with molecular masses between 70 and 100 kDa. Conclusions: The effectiveness and characteristics of these enzymes indicate that LMI01 can be an alternative for the hydrolysis of lignocellulosic materials and should be tested in commercial formulations.

Pectin lyase overproduction by Penicillium griseoroseum mutants resistant to catabolite repression

Abstract Expression of pectinolytic genes is regulated by catabolic repression limiting the production of pectin lyase (PL) if the natural inducer, pectin, is missing from the growth medium. Here, we report the isolation of Penicillium griseoroseum mutants resistant to 2-deoxy-d-glucose (DG) that show resistance to catabolite repression and overproduce PL. Three spontaneous and nine UV-induced mutants were obtained. Some mutants produced sectors (segments morphologically different) that were also studied. The mutants were analyzed for pectinases production on pectinase-agar plates and five mutants and two sectors showing larger clearing zones than the wild type were selected for quantitative assay. Although PL production higher than the wild type has been found, phenotype instability was observed for most of the mutants and, after transfers to nonselective medium, the DG resistance was no longer present. Only mutants M03 and M04 were stable maintaining the DG-resistance phenotype. When growing for 120 h in liquid medium containing glucose with or without pectin, both mutants showed higher PL production. In the presence of glucose as sole carbon source, the mutant M03 produced 7.8-fold more PL than the wild type. Due its phenotypic stability and PL overproduction, the mutant M03 presents potential for industrial applications.

Xylanase and beta-xylosidase from Penicillium janczewskii: Purification, characterization and hydrolysis of substrates

Background: Xylanases and β-D-xylosidases are the most important enzymes responsible for the degradation of xylan, the second main constituent of plant cell walls. Results: In this study, the main extracellular xylanase (XYL I) and p-xylosidase (BXYL I) from the fungus Penicillium janczewskii were purified, characterized and applied for the hydrolysis of different substrates. Their molecular weights under denaturing and non-denaturing conditions were, respectively, 30.4 and 23.6 kDa for XYL I, and 100 and 200 kDa for BXYL I, indicating that the latter is homodimeric. XYL I is highly glycosylated (78%) with optimal activity in pH 6.0 at 65°C, while BXYL I presented lower sugar content (10.5%) and optimal activity in pH 5.0 at 75°C. The half-lives of XYL I at 55, 60 and 65°C were 125,16 and 6 min, respectively. At 60°C, BXYL I retained almost 100% of the activity after 6 h. NH4+,Na+, DTT and β-mercaptoethanol stimulated XYL I, while activation of BXYL I was not observed. Interestingly, XYL I was only partially inhibited by Hg2+, while BXYL I was completely inhibited. Xylobiose, xylotriose and larger xylooligosaccharides were the main products from xylan hydrolysis by XYL I. BXYL I hydrolyzed xylobiose and larger xylooligosaccharides with no activity against xylans. Conclusion: The enzymes act synergistically in the degradation of xylans, and present industrial characteristics especially in relation to optimal activity at high temperatures, prolonged stability of BXYL I at 60°C, and stability of XYL I in wide pH range.

Purification and biochemical characterization of endoglucanase from Penicillium pinophilum MS 20.

Cellulases find increasing prominence in sustainable production of fuel and feedstock from lignocellulosic biomass. The purification and biochemical characterization of individual components of cellulase complex is important to understand the mechanism of their action for the solubilization of crystalline cellulose. In this study, an extra-cellular endoglucanase isolated from culture filtrate of Penicillium pinophilum MS 20 was purified to homogeneity by ammonium sulphate precipitation, ion-exchange chromatography and gel filtration. The purified endoglucanase (specific activity 69 U/mg) was a monomeric protein with molecular mass of 42 kDa, as determined by SDS-PAGE. The endoglucanase was active over a broad range of pH (4-7) with maximum activity at pH 5 and showed optimum temperature of 50°C. It retained 100% activity at 50°C for 6 h and half- lives of 4 h and 3 h at 60°C and 70°C, respectively. The kinetic constants for the endoglucanase determined with carboxymethyl cellulose as substrate were Vmax of 72.5 U/mg and apparent Km of 4.8 mg/ml. The enzyme also showed moderate activity towards H3PO4 swollen cellulose and p-nitrophenyl β-D-glucoside, but no activity towards filter paper, Avicel and oat spelt xylan. The activity was positively modulated by 47, 32 and 25% in the presence of Co2+, Zn2+ and Mg2+, respectively to the reaction mixture. The wide pH stability (4-7) and temperature stability up to 50°C of endoglucanase makes the enzyme suitable for use in cellulose saccharification at moderate temperature and pH.

Thermostable saccharogenic amylase produced under submerged fermentation by filamentous fungus Penicillium purpurogenum

The effect of several nutritional and environmental parameters on Penicillium purpurogenum growth and sacharogenic amylase production was analyzed. High enzyme levels (68.2 U mg-1) were obtained with Khanna medium at initial pH 6.0, incubated at 30ºC for 144 hours. The optimum pH and temperature activities were 5.0 and 65ºC, respectively. The enzyme presented a half-life (t50) of 60 min, at 65ºC. Only glucose was detected after 24 hours of reaction using soluble starch as substrate.

Tannase production by Penicillium atramentosum KM under SSF and its applications in wine clarification and tea cream solubilization

Tannin acyl hydrolase commonly known as tannase is an industrially important enzyme having a wide range of applications, so there is always a scope for novel tannase with better characteristics. A newly isolated tannase-yielding fungal strain identified as Penicillium atramentosum KM was used for tannase production under solid-state fermentation (SSF) using different agro residues like amla (Phyllanthus emblica), ber (Zyzyphus mauritiana), jamun (Syzygium cumini), Jamoa (Eugenia cuspidate) and keekar (Acacia nilotica) leaves. Among these substrates, maximal extracellular tannase production i.e. 170.75 U/gds and 165.56 U/gds was obtained with jamun and keekar leaves respectively at 28ºC after 96 h. A substrate to distilled water ratio of 1:2 (w/v) was found to be the best for tannase production. Supplementation of sodium nitrate (NaNO3) as nitrogen source had enhanced tannase production both in jamun and keekar leaves. Applications of the enzyme were studied in wine clarification and tea cream solubilization. It resulted in 38.05 percent reduction of tannic acid content in case of jamun wine, 43.59 percent reduction in case of grape wine and 74 percent reduction in the tea extract after 3 h at 35ºC.

Purification and properties of an extracellular pectin lyase produced by the strain of Penicillium oxalicum in solid-state fermentation.

A pectin lyase (PNL, EC 4.2.2.10) produced extracellularly by the strain of Penicillium oxalicum in solid-state fermentation medium containing deoiled mandarin orange peel meal was purified to apparent homogeneity by a protocol that included ammonium sulfate precipitation, DEAE-Sephadex A-50 and Sephadex G-100 chromatography. The enzyme had molecular mass of 50 kD, as determined by SDS- PAGE and showed optimum pH and temperature at 8.0 and 50 degrees C respectively. It had an isoelectric point (pI) of 5.0 and showed a K(m) of 1.1 mg/ml of citrus pectin. The enzyme was strongly inhibited by Mo4+, Ag+ and Pb2+ and also by polyphenolic compounds, in particular tannic acid.

Enzymatic characteristics of ligninperoxidases from Penicillium citrinum, Fusarium oxysporum and Aspergillus terreus using n-propanol as substrate.

The activities of ligninperoxidases from Penicillium citrinum MTCC 3565, Fusarium oxysporum MTCC 3379 and Aspergillus terreus MTCC 3374 have been assayed and the enzymatic characteristics like Km, pH and temperature optima using n-propanol as the substrate have been reported. The results suggest that n-propanol can substitute veratryl alcohol as substrate for assaying ligninperoxidase activities from different fungal strains, without affecting the enzymatic characteristics. The above strains were selected, as they were known to secrete ligninperoxidase in the liquid culture medium.

Easy detection of green fluorescent protein multicopy transformants in Penicillium griseoroseum

Penicillium griseoroseum, a deuteromycete fungus producer of pectinolytic enzymes, was transformed with a gene encoding for green fluorescent protein (GFP). The selection of transformants was based on the homologous nitrate reductase gene (niaD). Protoplasts of a P. griseoroseum Nia mutant (PG63) were co-transformed with the plasmids pNPG1 and pAN52-1-GFP. The plasmid pNPG-1 carries the homologous niaD gene and pAN52-1-GFP carries the SGFP-TYG version of GFP. The highest transformation efficiency (102 transformants/µg of pNPG1) resulted from the utilization of equimolar amounts of transforming and co-transforming vectors. Analysis of pAN52-1-GFP insertions into the genomic DNA of the transformants revealed single and multiple copy integrations. The transformants possessing a single copy of the gfp gene showed a low level of fluorescence, whereas multicopy transformants displayed strong fluorescence under visualization with fluorescent light. The transformants showing high expression of the gfp gene had the normal mycelia pigmentation altered, displaying a bright green-yellowish color, visible with the naked eye on the plates, without the aid of any kind of fluorescent light or special filter set.

Secretion of ligninperoxidase by Penicillium citrinum, Fusarium oxysporum and Aspergillus terreus.

Secretion of ligninperoxidase [E.C.1.11.1.7] by Penicillium citrinum, Fusarium oxysporum and Aspergillus terreus in liquid culture growth medium has been demonstrated. Enzymatic characteristics like Km, pH and temperature optima using veratryl alcohol as the organic substrate of ligninperoxidases from above sources have been determined. Km values using veratryl alcohol as substrate for enzymes from P. citrinum, F. oxysporum and A. terreus were 69, 64 and 60 microM respectively. Km values using H2O2 as the variable substrate were 64, 72 and 80 microM.The pH optima were 4.0, 2.3 and 2.0 respectively. The values of temperature optima were 30 degrees, 25 degrees and 22 degrees C for the enzymes from P. citrinum, F. oxysporum and A. terreus respectively.

Sugar-cane juice induces pectin lyase and polygalacturonase in "Penicillium griseoroseum"

The use of other inducers as substitutes for pectin was studied aiming to reduce the production costs of pectin enzymes. The effects of sugar-cane juice on the production of pectin lyase (PL) and polygalacturonase (PG) by "Penicillium griseoroseum" were investigatedd. The Fungus was cultured in a mineral medium (ph 6.3) in a rotary shaker (150 rpm) for 48 h at 25§C. Culture media were supplemented with yeast extract and sucrose or sugar-cane juice. Sugar-cane juice added singly to the medium promoted higher PL activity and mycelical dry weight when compared to pectin and the use of sugar-cane juice and yeast extract or pectin. The results indicated that were similar to those obtained with sucrose-yeast extractor pectin. The results indicated that, even at low concentrations, sugar-cane juice was capable of inducing pectin lyase and polygalacturonase with no cellulase activity in "P. griseoroseum".

Effect of mycotoxins isolated from Penicillium nigricans on glucose-6-phosphate dehydrogenase.

A new mycotoxin product (NMP) was isolated from the culture of mutated wild strain of P. nigricans which is less toxic and has sterol derivative. NMP (LD50 > 1 g/kg) showed antimicrobial and antineoplastic activities and does not affect the hematological parameters like RBC count and hemoglobin. It maintained normal blood glucose level by increasing the enzyme activity of glucose-6-phosphate dehydrogenase (EC-1.1.1.49; G-6-PDH) by 30%. It also maintained the normal ion balance in the blood of mice. NMP decreased Km value of glucose-6-phosphate dehydrogenase and thus increased substrate affinity of the enzyme. Reduction of toxicity of NMP has been well explained by higher activity of G-6-PDH which is highly specific for production of NADPH.

Edam cheese manufacture with rennin-like enzyme from penicillium funiculosum

Fungal enzyme from Penicillium funiculosum E-NRC 629 a rennet substitute was used as milk clotting enzyme in the manufacture of Edam cheese from cow's milk. Resultant cheese was ripened for 90 days and analyzed when fresh and after 15, 30, 60 and 90 days of moisture content, acidity%, fat/DM, soluble nitrogen no-protein nitrogen, amino acid nitrogen, and total volatile fatty acid [TVFA]. Moreover, cheese was evaluated organoleptically. The obtained results showed that the breakdown of protein content, and TVFA was higher in Edam cheese made with fungal enzyme or its mixture rennet enzyme than in control cheese throughout the ripening period. Moreover, experimental cheese gained acceptable body with a good clean flavor during the ripening period. According to these studies it was concluded that using fungal enzyme of Penicillium funiculosum E-NRC 629 for Edam cheese manufacture is acceptable, it enhanced flavor development and improved cheese quality during ripening

Differentiation between alanine-glutamate and alanine-glycine transaminase activities of penicillium martensii

Dialyzed cell-free extracts of Penicillium martensii contained, at the constitutive level, two different alanine transaminase catalyzing the formation of pyruvate and glutamate from alanine and alpha- oxoglutarate. The second was alanine-glycine from alanine and glyoxylate. The reversibility of the two reactions was demonstrated. Optimum activity of both enzymes occurred at pH 8.0 and 40C, but their temperature activity profiles and heat inactivation kinetics were different. The activity of the two enzymes was stimulated by addition of pyridoxal phosphate, whereas hydroxylamine inhibited it. The inhibition by hydroxylamine was overcome by pyridoxal phosphate